Information from the old T.E.C. website about how to build and operate the Flux Capacitor. It contains various information is somewhat different compared to some of the sources we're used to, which is interesting.
----------
It should be mentioned however, that before a (time displacement) can occur, the circuit must first be connected to a variable 44 volt dc power supply. Also while using the (S2) push button switch, the voltage must also be pulsed at 2 cycles per second. If a lesser voltage is used, and the current is pulsed at a different frequency, then the most that you will be able to accomplish, or at least in most cases, is an out of the body experience. The place in which to purchase most of these components, can be brought through (Skycraft Electronics). Their telephone number is: (407) 628-5634. However, as for the 1M ohm 10W potentiometer and the piezo transducer, both of these items can be obtained through your local Radio Shack store. The dials to be used, should...
T.E.C. Flux Capacitor
----------
It should be mentioned however, that before a (time displacement) can occur, the circuit must first be connected to a variable 44 volt dc power supply. Also while using the (S2) push button switch, the voltage must also be pulsed at 2 cycles per second. If a lesser voltage is used, and the current is pulsed at a different frequency, then the most that you will be able to accomplish, or at least in most cases, is an out of the body experience. The place in which to purchase most of these components, can be brought through (Skycraft Electronics). Their telephone number is: (407) 628-5634. However, as for the 1M ohm 10W potentiometer and the piezo transducer, both of these items can be obtained through your local Radio Shack store. The dials to be used, should...
T.E.C. Flux Capacitor